更新時間：2022-11-29
文章來源：http://m.74seba.com/
閱讀量：22
在一場表演中，舞臺燈火控臺歸于整個燈火體系的控制設備，是整個流程的"大腦",因此在運用保護方面需要十分注意，下面
山東舞臺燈光廠家給大家介紹舞臺燈火知識之燈火控臺的運用與保護保養注意事項。
In a performance, the stage lighting console belongs to the control equipment of the whole lighting system and is the "brain" of the whole process. Therefore, great attention should be paid to the application and protection. Next, Shandong stage lighting manufacturer will introduce the application, protection and maintenance precautions of the stage lighting console.
一、數據備份：假如編程過程中或許編好程序后需求離開現場，一定要用U盤備份控臺數據，否則若控臺毛病或遭到人為損壞，情況將不堪設想。
1、 Data backup: If you need to leave the site after programming, you must use a USB flash disk to backup the console data, otherwise if the console is defective or damaged artificially, the situation will be unimaginable.
二、備用控臺：任何電子產品都有出毛病的幾率，為了避免表演中途出現意外情況，備用一臺同型號的控臺，把數據別的備份一份。假如條件不允許，備用一個192控臺或許240控臺也是能夠的。
2、 Standby console: Any electronic product has a chance of failure. In order to avoid accidents in the middle of the performance, a console of the same model should be used for backup and a copy of other data should be made. If conditions do not permit, it may be possible to reserve a 192 console or a 240 console.
三、接地防靜電：電子產品運用接地電源是規范的基本要求，尤其是氣候枯燥和有地毯的環境下，更簡單簡單發生大量靜電。但是國內實際運用場所，不一定能很好的找到接地電源供電。為了防止控臺機體累積的靜電，擊傷操作人員或許損壞控臺芯片，然后導致燈火控臺運轉紊亂。操作員有必要現場采取簡易的接地方法，例如用導電線銜接控臺的接地螺絲，導電線另一端用操作臺壓到地板上等。
3、 Grounding and anti-static: the use of grounding power supply for electronic products is the basic requirement of safety specifications, especially in the dry climate and carpet environment, it is easier to generate a large amount of static electricity. However, it is not always possible to find a good grounding power supply in domestic practical application places. In order to prevent the static electricity accumulated in the console body, the operator may be injured or the console chip may be damaged, which may lead to the disorder of the operation of the lighting console. It is necessary for the operator to adopt simple grounding methods on site, such as connecting the grounding screw of the control console with the conductor, and pressing the other end of the conductor onto the floor with the console.
四、防潮防塵：行業內的一些燈火控臺選用的按鍵內部接觸面都是金屬的，潮濕的環境很簡單導致金屬面氧化，令運用過程中按鍵不靈敏。所以對燈火控制器進行防潮保護顯得格外重要。
4、 Moisture proof and dust-proof: The internal contact surfaces of the buttons selected for some lighting consoles in the industry are all metal. The wet environment simply leads to oxidation of the metal surface, which makes the buttons insensitive during use. So it is very important to protect the lamp controller from moisture.
燈火控制器上的推桿是一個非常精準的電子元件，假如長期將控臺暴露在外面，很簡單使推桿里累積灰塵，直接導致推桿運轉數據跳動或許數據不能歸零等問題發生。所以許多燈火控臺在出廠的時分，都裝備了防塵皮套或許布套。在控臺不運用的時分，應該盡量蓋好防塵布套。
The push rod on the light controller is a very accurate electronic component. If the console is exposed to the outside for a long time, it is easy to accumulate dust in the push rod, which directly leads to problems such as the data pulsation of the push rod operation or the data cannot be reset to zero. Therefore, many light control consoles are equipped with dust boots or cloth covers when they leave the factory. When the console is not in use, the dust-proof cloth cover should be covered as far as possible.
With regard to the application, protection and maintenance of the shared stage lighting console, we explained this problem from four aspects. If you have any ideas or needs, please come to our website http://m.74seba.com consulting service
魯公網安備 37010202002516號
