更新時間：2022-11-21
文章來源：http://m.74seba.com/
閱讀量：22
因?yàn)橄硎芤魳?，享受生活，才?huì)買音響，但是有些人買了音響系統的都不知道怎么愛護，那么現在就來好好探究下怎樣保護
山東音響。
Because you can enjoy music and life, you will buy a stereo. But some people who buy a stereo system don't know how to love it. Now let's explore how to protect Shandong stereo.
擺放，也就是要注意擺放的位置，不能擺在陽光直射的地方，會造成表面老化，起泡等原因；不要擺放在潮濕的環境中，以免造成機內元件過早老化，設備表面氧化生銹。
Placement, that is, pay attention to the placement position, and do not place it in the direct sunlight, which may cause surface aging, blistering and other reasons; Do not place it in a damp environment to avoid premature aging of internal components and oxidation and rust of equipment surface.
其次就是注意音響使用的環境溫度。家庭影院音響器材正常的工作溫度應該為18℃~45℃。溫度太低會降低某些機器的靈敏度;太高則容易燒壞設備，或者會讓元件提早老化。
The second is to pay attention to the ambient temperature of the stereo. The normal working temperature of home theater audio equipment should be 18 ℃~45 ℃. Too low temperature will reduce the sensitivity of some machines; If it is too high, it is easy to burn out the equipment or make the components age earlier.
再者就是注意電壓頻密。音響應在正常電壓下工作，如果長時間在非額定功率的環境下工作，會加快音箱內部零件的老化。
Moreover, pay attention to the frequency of voltage. The audio should work under normal voltage. If it works under the environment of non rated power for a long time, it will accelerate the aging of the internal parts of the speaker.
然后注意設備的開關順序。使用音響時應該先啟動的是信號源設備。通常除了功放，我們還會選擇碟機等音源設備，在幾樣設備先后啟動的過程中，我們應當特別注意開機關機的順序。
Then note the switching sequence of the equipment. When using the audio, the signal source equipment should be started first. Generally, in addition to power amplifiers, we also choose audio source devices such as disc players. In the process of starting several devices successively, we should pay special attention to the order of power on and power off.
開機時應當先啟動像碟機這樣的音源等前置設備，再開功放，關機時，則先關功放后關前置設備。關機時還應將音響的音量調小，不僅可以減輕開關機時對音響的沖擊，而且下次開機時不會讓你自己嚇一跳。
When starting up, you should first start the front-end devices such as audio sources such as disc players, and then turn on the power amplifier. When turning off, you should turn off the power amplifier first and then turn off the front-end devices. Turn down the volume of the stereo when you turn it off. This will not only reduce the impact on the stereo when you turn it on or off, but also won't scare you when you turn it on next time.
總而言之，音響設備也是需要維護和保養的，好好注意以上情況，你的音響就可以保護得很好，延長壽命。更多相關內容就來我們網站
http://m.74seba.com咨詢吧！
In a word, audio equipment also needs maintenance. Pay attention to the above situations, and your audio can be well protected and extend its life. More relevant content will come to our website http://m.74seba.com Consult!
魯公網安備 37010202002516號
