更新時間：2022-10-20
文章來源：http://m.74seba.com/
閱讀量：22
一個好的多媒體會議室，肯定離不開強大的會議室音響，可以讓整個會場的聽眾都能夠聽到重要的聲音，但是連接多媒體會議多媒體音響設備的時候，有很多內容需要我們了解。下面
山東會議室音響廠家來講講多媒體會議音響設備的連接順序。
A good multimedia conference room can't be separated from a powerful conference room sound, which can enable the audience in the whole conference room to hear important sounds. However, when connecting multimedia audio equipment for multimedia conference, we need to understand a lot of content. Next, Shandong conference room audio manufacturer will talk about the connection sequence of multimedia conference audio equipment.
一、會議室音響設備連接順序
1、 Connection sequence of conference room audio equipment
1、低音系統設備連接順序：
1. Connection sequence of bass system equipment:
調音臺(1-2編組)→均衡器→分頻器→壓限器→低音功放→低音音箱。
Sound mixing console (1-2 groups) → equalizer → frequency divider → pressure limiter → bass amplifier → bass speaker.
2、輔助音響系統設備連接順序：
2. Auxiliary audio system equipment connection sequence:
調音臺(3-4編組)→均衡器→延時器(可選)→壓限器→輔助音箱功放→輔助音箱。
Sound mixing console (3-4 formation) → equalizer → time delay device (optional) → pressure limiter → auxiliary loudspeaker power amplifier → auxiliary loudspeaker.
3、主音響系統設備連接順序：
3. Main audio system equipment connection sequence:
調音臺(L-R主通道)→均衡器→激勵器(可選)→反饋抑制器(可選)→壓限器→主音箱功放→主音箱。
Mixer (L-R main channel) → equalizer → exciter (optional) → feedback suppressor (optional) → pressure limiter → main speaker power amplifier → main speaker.
4、監聽系統設備連接順序：
4. Connection sequence of monitoring system equipment:
調音臺(AUX輸出)→均衡器→壓限器→監聽音箱功放→監聽音箱。
Mixer (AUX output) → Equalizer → Pressure limiter → Monitor loudspeaker power amplifier → Monitor loudspeaker.
二、會議室音響設備簡單的系統組成部分
2、 Simple system components of conference room audio equipment
1、組成部分：
1. Components:
音源設備、調音臺、效果器、功放、全頻音箱
Sound source equipment, mixer, effector, power amplifier, full frequency speaker
2、連接方式
2. Connection mode
音源設備-調音臺-功放-音箱，設備間采用鏈?zhǔn)竭B接。
Sound source equipment - mixer - power amplifier - speaker, and chain connection is adopted between equipment.
鏈?zhǔn)竭B接方式：前設備輸出口(OUT或OUTPUT)與后設備輸入口(IN或INPUT)相連接的方式。
Chain connection mode: the mode of connecting the front equipment output port (OUT or OUTPUT) and the rear equipment input port (IN or INPUT).
3、設備接口
3. Equipment interface
專門的設備的接口，無論是卡農口還是直插口，一律使用卡農或大三芯接插件用平衡方式連接，CD機之類用RCA蓮花插座輸出信號的音源設備，可使用蓮花轉大二芯線接入調音臺LINEIN接口。
The interface of special equipment, whether it is a Canon or a straight socket, shall be connected in a balanced way using Canon or large three core connectors. CD players and other audio source equipment that use RCA Lotus socket to output signals can be connected to the LINEIN interface of the mixer using Lotus to large two core cable.
上述內容中已經為大家詳細的總結完了，相信大家看完之后會對此有新的認識和了解，如若想要了解更多的知識內容，可以多多關注我們的網站
http://m.74seba.com，希望能夠幫助到大家。
The above content has been summarized in detail for you. I believe you will have new understanding and understanding after reading it. If you want to know more, you can pay more attention to our website http://m.74seba.com I hope it can help you.
魯公網安備 37010202002516號
