更新時間：2021-08-12
文章來源：http://m.74seba.com/
閱讀量：22
山東音響設備應該如何配置電源呢？配置怎樣的電源才是實惠的呢？怎樣配置電源才能更加安 全呢？跟隨山東音響來了解一下吧！
How should Shandong professional audio equipment be equipped with power supply? What kind of power supply is affordable? How to configure the power supply to be safer? Follow Shandong professional audio to understand it!
1.使用三相動力電
1. Use three-phase power
一般情況下，為了讓音響設備能夠正常用電都會安裝配置三相動力電源，如果是非常重要的場合，還應該使用兩條獨立的三相動力電源，這樣一來，當其中一條三相動力電源出現故障時，就可以使用另外一條備用的電源，因此，不會導致整個音響系統出現癱瘓。
Generally, in order to enable professional audio equipment to use electricity normally, three-phase power supply will be installed and configured. If it is a very important occasion, two independent three-phase power supplies should also be used. In this way, when one of the three-phase power supplies fails, the other standby power supply can be used. Therefore, Will not cause paralysis of the entire audio system.
2.要和其他電源分開配置
2. It shall be configured separately from other power supplies
電源電壓如果不穩定就會對音響設備中的一些精 密元器件造成損壞，從而導致音響設備無法發揮出優良的聲音效果，嚴重情況下還會導致設備的損壞。因此，為了確保音響設備能夠使用穩定不受干擾的電源，應該與家中其他燈光以及電器的電源分開來配置。
If the power supply voltage is unstable, it will damage some precision components in professional audio equipment, resulting in the failure of audio equipment to play a good sound effect, and in serious cases, it will also lead to equipment damage. Therefore, in order to ensure that professional audio equipment can use a stable and undisturbed power supply, it should be configured separately from the power supply of other lights and electrical appliances in the home.
3.總電源分配要合理
3. The total power distribution shall be reasonable
在使用音響設備的時候，只有強勁的電源還不夠，還應該做好電源的分配。一般情況下，調音臺及各種音源設備需要有一路獨立的電源，各種周邊設備也要有一路獨立的電源，此外，功放和其它設備應該有兩路獨立的電源。而且，每一路獨立電源還?使用相應的空氣開關來進行控制。
When using professional audio equipment, only strong power supply is not enough, and power distribution should be done well. Generally, the mixer and all kinds of sound source equipment need to have one independent power supply, and all kinds of peripheral equipment should also have one independent power supply. In addition, the power amplifier and other equipment should have two independent power supplies. Moreover, each independent power supply also uses the corresponding air switch for control.
魯公網安備 37010202002516號
